Floor
Mats
with Static Control Properties
7 Types
The choice of which
mat to choose is more often determined by the
type of floor the mat will be used on and/or whether chairs, carts or
heavy objects will be used on top of the mat.
All of the mats
below will help resolve your static electricity problems.
Some will work better in different situations because of the construction
design to deal with the issues above.
The technical
difference between anti-static (static dissipative) and
conductive mats is the speed at which the static electricity is
removed.
Faster static removal speed is not an indication of a superior
product.
To the contrary removal of static electricity to quickly can actually
damage circuit boards.
Anti-Static Floor Mats
Product 1
Designed
for hard surface floor applications.
Not recommended for use under chairs or on carpeting.
Maxi-Textured
surface ensures maximum static dissipative
contact while providing slip protection.
Construction
design allows effective static charge removal
at a non damaging flow rate.
Maintains
a consistent discharge through the life of the mat
with no noticeable deterioration of effectiveness.
Surface
Resistivity rating 109-1010 ohm
Thickness:
1/8" (0.125")(3.175 mm)
Anti-Static Floor Mats
Product 2
Designed for use as:
Desk
Chair Mat
Server
Room Floor
Electronic
Equipment Platform
Designed for hard surface and short pile carpet
floor applications.
Designed for use under chairs and carts.
Patterned
surface ensures maximum static dissipative contact while providing slip
protection.
Construction
design allows effective static charge removal at a non damaging flow rate.
Maintains
a consistent discharge through the life of the mat with no noticeable
deterioration of effectiveness.
Extremely
dense composition provides added durability.
Surface
Resistivity rating 109-1010 ohm
Thickness:
3/16" ( 0.1875”) (4.76 mm)
Anti-Static Floor Mat
Product 3
Color: Luster Gray
Designed
for hard surface floor applications.
Can be used under chairs and carts.
Static
dissipative nylon carpet adhered to a static dissipative vinyl.
Heat
set nylon carpet resist matting and maintains its luxurious
appearance even after extended use.
Maintains
a consistent discharge through the life of the mat with no
noticeable deterioration of effectiveness.
All
mats have finished borders on all sides except 60’ rolls which have
borders on 60’ sides only.
Surface
Resistivity rating 109-1010 ohm
Anti-Static Floor Mat
Product 4
The fastest Static removal properties of any Anti-Static Mat
Conductive bottom layer removes static as fast
as any mat on the market.
Can be
utilized as anti-static or conductive mat simply by turning upside down.
Designed
for hard surface floor applications.
Not recommended for use under chairs.
Two
layer construction consisting of solid durable flexible rubber providing
excellent lay-flat characteristics.
Static
dissipative semi-gloss gray top layer 107-108 ohms
allows effective static charge removal at a non damaging flow rate.
Conductive
black layer 103-104 ohms provides a reliable, consistent and rapid static
charge grounding path.
Resistant
to heat, abrasion, solder and most chemicals.
Maintains
a consistent discharge through the life of the mat with no noticeable
deterioration of effectiveness.
Thickness:
0.080” (2.0 mm)
Construction
design allows effective static charge removal at a non damaging flow rate.
Maintains
a consistent discharge through the life of the mat with no noticeable
deterioration of effectiveness.
Click
for floor mat data sheet
Anti-Static Floor Mat
Product 5
The fastest Static removal properties of any vinyl Anti-Static Mat
Three Layer Construction.
Extremely dense vinyl (for added strength)
allows this product to be used on work surfaces and/or floors.
When Durability and SPEED
Count
3 Layer Construction:
Top Surface - Abrasive resistant dissipative solid vinyl.
Inner Layer - Conductive carbon mesh providing reliable, consistent and rapid static charge grounding path.
Bottom Layer - Abrasive resistant dissipative solid vinyl.
Overall
thickness: 3/32” (0.094) (2.38 mm)
Resitivity
106-107 ohms
Designed
for hard surface floor applications.
Not recommended for use under chairs.
Conductive Floor Mat Product
1
Designed
for hard surface floor applications.
Not recommended for use under chairs.
Dual functional
mat contains a conductive black layer and
a static dissipative gray layer.
Place
black layer on top if conductive mat is desired.
Place
Gray layer on top if static dissipative layer is desired.
Smooth
semi-gloss surface allows maximum contact to
ensure the highest static dissipation.
Two
layer construction consisting of solid durable flexible
rubber providing excellent lay-flat characteristics.
Conductive
black layer 103-104 ohms provides a reliable,
consistent and rapid static charge grounding path. Dissipative
abilities may be too quick for direct contact with circuit packs,
semiconductors and other micron circuit devices.
Static
dissipative gray layer 108-109 ohms provides a rapid but
controlled static charge grounding path.
Thickness:
0.080” (2.0 mm)
Resistant
to heat, abrasion, solder and most chemicals.
Conductive Floor Mat Product
2
12"x12" tiles that snap together to form a mat
of any size or dimension.
Designed for use as:
Server
Room Floor
Electronic
Equipment Platform
Telephone
Equipment Platform
Designed
for hard surface and short pile carpet floor applications.
Can be used (within specified imitations) under chairs and
carts.
Textured
surface ensures maximum static dissipative contact while
providing slip protection.
Unique
modular design allows coverage of any size or shaped area.
Requires no training to assemble.
Can be
used as anti-static sub floor for computer rooms, testing and
diagnostic laboratories, research and development facilities.
Surface
Resistivity rating 5 x 104 ohm